Cutting machine

Cutting machine Z+F UNICUT 8017

Technical information

Batch operation
Data can be generated on the machine or manually imported with the software Z+F Manager via a PC. An Excel file from CAE software can also be imported. Cutting of wires starts automatically after confirming the production order, with pause function.

Processing and wiring assistant
Wire data can be imported to the machine as in the batch operation. The machine runs in stop-and-go mode and in this mode one wire will be produced at a time. After cutting, the display changes and the wire end processing for start and end, as well as connection terminal designation in the switch cabinet will be displayed.

Ask for a quote

Contact our technical sales department and receive a non-binding offer within one day.

  • Multicore conductor:
    0,08 – 10 mm²
    (AWG 28 – 8)

    Single core conductor:
    0,08 – 2,5 mm²
    (AWG 28 – 14)

    Max. conductor diameter:
    8 mm (0.31 in.)

    Forward feed:
    1,5 m/s (4.9 ft./s)

    Length correction:
    artikelspezifisch einstellbar, Schlupfkorrektur in mm

    Preselection of length:
    2 – 99999 mm
    (0.08 - 3936.96 in.)

    Storing up to:
    2.000 Schneidaufträge

    Interface:
    USB 1.1, USB 2.0

    Power supply:
    100-240; 50; 240
    V; Hz; VA

    Dimensions (w x d x h):
    380 x 360 x 470 mm
    (15 x 14.2 x 18.5 in.)

    Weight:
    20 kg
    (44.09 lbs)

    Order specifications V10CC000050

  • Data can be generated on the machine or can be manually imported with the software Z+F Manager

    An Excel file from CAE software can also be imported

    Cutting of wires starts automatically after confirming the production order

    With pause function

    Processing and wiring assistant