Based on the high quality laser scanner Z+F IMAGER®, Zoller + Fröhlich GmbH and DMT GmbH & Co. KG have developed an explosion proof 3D laser scanner. The Z+F IMAGER® 5006EX pioneers surveying in underground mining and industries where explosive atmospheres occur. The Z+F IMAGER® 5006EX is the world´s first ATEX approved 3D laser scanner for use in mining and industrial applications under explosive conditions.The Z+F IMAGER® 5006EX is class I and class II approved according to ATEX directive 94 / 9 / EG. The ATEX directive 94 /9 / EG "Equipment and protective systems intended for use in potentially explosive atmospheres" is a European standard. The ATEX approval for this equipment is widely accepted outside the European community as well.
The laser scanner has a nominal range of 79 m. This range of distances makes it possible to use the scanner efficiently in almost all explosive applications.
The field of view of 310° vertical and 360° horizontal covers a very large scan area, which enables complete documentation with relatively few scan positions.
The stand-alone concept guarantees more flexibility. No external equipment is required to scan in the field. Because of that, additional ignition sources in explosive atmospheres are excluded.
Laser safety class: 3R (ISO EN 60825-1)
Beam divergence: 0.22 mrad
Beam diameter: 3 mm circular @ 1 m
Ambiguity interval: 79 m
Min. range: 0.4 m
Resolution range: 0.1 mm
Data aquisition rate: ≤ 508,000 pixel / sec
Linearity error up to 50 m: ≤ 1 mm
Range noise: 0.7 mm rms
System vertical: rotating mirror
System horizontal: rotating device
Field of view vertical: 310°
Field of view horizontal: 360°
Resolution vertical: 0.0018°
Resolution horizontal: 0.0018°
Accuracy vertical: 0.007° rms
Accuracy horizontal: 0.007° rms
Scanning speed: ≤ 50 r / s (3,000 r / min) max.
Tilt measurement: Resolution: 0.001°; Accuracy (zero point): 0.002°
Data storage: 60 GB internal HDD
Integrated operation panel: Keypad: 6 Buttons ; Display: 4 Lines
Data & Communication interface: Ethernet / W-LAN
Input voltage: 18V DC (scanner)
Power consumption: 65 W max.
Battery life time: 1 h (changeable battery pack)
Calibrated temperature: 0°C to +40°C
Storage temperature: -20°C to +50°C
Illumination: all conditions
Humidity; Dust/air humidity: non-condensing
Protection class: IP 53
Explosion protection: ATEX 94/9/EG, class I and II
Target reflectivity: no retro-reflectors
Oil and gas industry