The AM 04 is an electropneumatically driven, modular stripper crimper for the efficient processing of loose, insulated Z+F ferrules. The stripper crimper can be converted using appropriate set-up parts for wire end ferrules with cross sections from 4mm2 to 10 mm2 (AWG 12 - 8) and crimping lengths from 8mm to 18mm.
Specification
For defining required tools the correct specification of the processed ferrules as well as the processed wires are needed.
Crimping range:
4 + 6 mm²
(AWG 12 + 10)
Crimping length CL:
Trapez 8 – 18 mm
(Trapezium 0.31 – 0.71 in.)
Infeed length:
28 mm (1.10 in.) + CL
Cycle time:
3,0 s
Power supply:
100 – 240; 50/60; 110
V/Hz/VA
Air pressure:
5,5 bar (79.77 psi)
Dimensions (w x d x h):
550 x 415 x 440 mm
(20.9 x 15.7 x 18.1 in.)
Weight:
40 kg
(88.2 lbs)
Order specifications:
V10AM001000
Crimping range:
6 + 10 mm²
(AWG 10 + 8)
Crimping length CL:
Trapez 12 – 18 mm
(Trapezium 0.47 – 0.71 in.)
Infeed length:
28 mm (1.10 in.) + CL
Cycle time:
3,0 s
Power supply:
100 – 240; 50/60; 110
V/Hz/VA
Air pressure:
5,5 bar (79.77 psi)
Dimensions (w x d x h):
550 x 415 x 440 mm
(20.9 x 15.7 x 18.1 in.)
Weight:
40 kg
(88.2 lbs)
Order specifications:
V10AM001006
Crimping range:
4 + 10 mm²
(AWG 12 + 8)
Crimping length CL:
Trapez 8 – 18 mm (4 mm²)
Trapez 12 – 18 mm (10 mm²)
(Trapezium 0.31 – 0.71 in., AWG 12)
(Trapezium 0.47 – 0.71 in., AWG 8)
Infeed length:
28 mm (1.10 in.) + CL
Cycle time:
3,0 s
Power supply:
100 – 240; 50/60; 110
V/Hz/VA
Air pressure:
5,5 bar (79.77 psi)
Dimensions (w x d x h):
550 x 415 x 440 mm
(20.9 x 15.7 x 18.1 in.)
Weight:
40 kg
(88.2 lbs)
Order specifications:
V10AM001007
Electropneumatically driven modular Stripper-Crimper
Processing of loose insulated Z+F ferrules
For ferrules with cross-sections from 4 up to 10 mm2 (AWG 12 – 8) and crimping lengths from 8 up to 18mm
Individual adaptation of loose uninsulated ferrules