Laser scanner


Z+F MapCam® C, laserscanning accessory

With the camera system of Zoller + Fröhlich, color information can be mapped into data measured by the Z+F PROFILER® 9012 in one step.

The camera system Z+F MapCam C has high-resolution sensors, a very wide field of view and covers the entire measuring area.

The high frame rate of the cameras allows gapless and sharp images at speeds of up to 90 km/h.

The camera system is easy to install with just one tool. In addition, it may be used with any mobile mapping system (MMS) which is compatible with the Z+F PROFILER® 9012.






Z+F MapCam® C+

The new camera system Z+F MapCam® C+ has high-resolution sensors, a very wide field of view and a high dynamic range with images. Combined with the MapCams they cover the whole measuring area of the 2D laser scanner.

The camera C+ is exactly matched to the basic camera C , fully compatible with them and provide very realistic and parallax-free color information.


Ask for a quote

Contact our technical sales department and receive a non-binding offer within one day.

  • Camera
    Number of cameras: 2
    Frame rate: max. 6 frames/s
    Operating temperature: 0°C - 40°C
    Storage termperature: -20°C - 60°C, non-condencing

    Camera Sensor
    Sensor: IMX264
    CMOS size: 2456 x 2054 px
    Pixel size: 3,5 μm
    Resolution: 5,04 MPx

    Lens: Fisheye F1.8/2.7mm
    Field of view: 185° x 140°

    Calibration Pre-calibrated
    Speed: max. 90 km/h linear, max. 34 km/h curve (r = 6m)
    Output: JPEG-data for post processing (color mapping, photogrammetry,...)
    Connections: Power (24V), USB 3.0, IMU, Trigger
    Protection class: IP 54

    Equipment recommendations
    Laptop: Windows 10 (64 Bit), Intel i7 CPU, 512 GB SSD, 8 GB RAM, 12“ Full HD, Dualband WLAN
    USB cable: < 25 m

  • Road surveying

    Rail surveying

    Mobile mapping