Crimping module CM 04

Technical information

Electropneumatic driven, easily adaptable crimpmodule for processing of loose Z+F ferrules integrated in fully automatic machines. In the range of 0.5 to 10 mm² (AWG 20 – 8) wires and ferrules can be crimped. Standard is the trapezoidal crimp corresponding to DIN 46228 part 4. The machine can optionally be adapted to other crimpforms. Adjustments, important data, functions and status will be programed and shown on the touch display. Universal use in the specified range without tool change. I/O interface enables easy integration and time-optimized function in fully automatic systems.

Ask for a quote

Contact our technical sales department and receive a non-binding offer within one day.

  • Crimping range:
    0,5 – 10 mm²
    (AWG 20 – 8)

    Crimping length CL:
    6 – 18 mm / Quadro 6 – 12 mm
    (0.24 - 0.71 / Quadro 0.24 - 0.47 in.)

    Infeed length:
    12 mm
    (0.47 in.) 

    Cycle time:
    1,5 s

    Power supply:
    100 – 240/50 – 60/205
    V/Hz/VA

    Air pressure:
    6,0 bar
    (87.02 psi)

    Dimensions (w x d x h):
    260 x 460 x 510 mm
    (10.2 x 18.1 x 20 in.)

    Weight:
    30 kg
    (66.14 lbs)

  • Electropneumatically driven crimping module for processing loose wire end ferrules on fully automatic machines

    The wires and ferrules can be crimped as standard with a trapezoidal crimp according to DIN 46228 part 4

    Universal use in the specified range without tool change.

    I/O interface